HiBREW Portable Coffee Machine DC12V. Manual. Review.

HiBREW Portable Coffee Machine DC12V

Before use HiBREW Portable Coffee Machine

Product structure

Name: Nomadic espresso machine
Rated voltage: DC12V
Rebed power:  80W
Water tank capacity: 60 ml
Dimeouons: 238mm*75mm
Walght: 600 g

Product parameters HiBREW Portable Coffee Machine DC12V

1.Cover
2. Host
3. Switch button
4. DC12V power socxet
5. Capsule holder
6. Cup

Precautions

1. Please use the corresponding coffee capsules according to different versions (see outer box).
2. After filling the capsule, please confirm whether the capsule hokler and the host are tight to prevent water leakage.
3. When adding water to the tank, the water volume cannot exceed the maximum water level line and must be pure water.
4. Sultable for use with DC12V car power supply, home adapter.
5. When removing the coffee capsule after the extraction, be careful of steam burns.
6. Be careful of stabbing (the bottom of the main unit and the n-type adapter needle) when using or cleaning.
7. When cleaning the main part should not be soaked in water and cleaned Wipe it with a damp eloth.

N version adapter needle

Bottom needle at the bottom of the host.

Product specifications and operating procedures: D version

D version capsule seat

Coffee capsule fillitig (using Dolce Custo coffee capsule):

Put the coffe capsule directly into the D version capsule seat.

Extracting coffee. HiBREW Portable Coffee Machine DC12V

1. Insert the capsule hokder of the dolce Gusto coffee capsule into the bottom of the main unit, ensuring tightening.
2. Put the product into the cup, then rotate the top cover to remove it, pour the appropriate amount of cold water, and then rotate the top cover.

3. Connect the product to the DC12V power supply, then press the switch to start the product and waut for 5-7 minutes for a cup of coffee.

Product specificatoins and operating procedures: N version

N version capsule sear
N version of the capsule adapter

Coffee capsule filling (using Nespresso genuine capsules):

1. Put the capsule into the N-piece capsule upside down.
2. Put the N version of the adapter, the outer wall of the adapter is aligned with the proove on the inner wall of the base and gently pressed.

Extracting coffee.HiBREW Portable Coffee Machine DC12V

1. Indert the capsule bokder of the Nespresso coffee capsule into the bottom of the main unit, ensuring tightening.
2. Put  the product into the cup, then rotate the top cover to remove it pour the approprtate amount of cold water, and then rotate the top cover.
3. Connect the product to the DC12V power supply then press the switch to start the product and wait for 5-7 minutes for a cup of coffee.

Product specificatoins and operating procedures: Caffee powder

Receptacle for coffee powderN version capsule sear 

Coffee powder filling:

1. Use the spoon to add the coffee powder.

2. Use the cap to close the coffee powder container.

Extracting coffee.HiBREW Portable Coffee Machine DC12V

1. Insert the ground coffee container into the Nespresso capsule seat  Insert it into the main unit, makingsure to tightening it securely. 
2. Put the product into the cup, then rotate the top cover to remove it pour the approprtate amount of cold water, and then rotate the top cover. 
3. Connect the product to the DC12V power supply then press the switch to start the product and wait for 5-7 minutes for a cup of coffee.

Cleaning HiBREW Portable Coffee Machine DC12V

Alter making coffee every time

1. After the standby unit is completely cooled, remove and discard the used coffee capsules in the base.
2. Rinse the with clean water. There are many mesh holes at the bottom of the base. Please use a brush to tinse and ensure that the mesh is not blocked.
3. The main boby can be scrubbed with a damp cloth.
Name: The main body cannot be soaked in water.

Questions / answers

1. The indicator light flashes quickly and connot work:
This is because the heater temperature is too high, the product is protected. If there is no water, please add. Before filling the tank, disconnect the unit from the power supply. Once the tank is full, plug the unit back in and turn it back on.
2. Water leaks at the capsule seat connection:
This is because the capsule seat is not tightened, please tighten capsule seat.
3.The indicator is not lit and cannot work:
This is because the power supply is not connected and please roconnected.