Deep Cleaner PROHEAT 2X REVOLUTION. Manual. Review.

PROHEAT 2X REVOLUTION Deep Cleaner USER GUIDE 1548, 1550, 1551 SERIES

IMPORTANT SAFETY INSTRUCTIONS Deep Cleaner PROHEAT 2X REVOLUTION

When using an electrical appliance, basic precautions should be observed, including the following: 

WARNING 
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: 

• Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug. 
• Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing. 
• Use indoors only. » Do not allow to be used as a toy. Close attention is necessary when used by or near children. 
• Do not use for any purpose other than described in this User’s Guide. Use only manufacturer’s recommended attachments. 
• Do not use with damaged cord or plug. If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center. 
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Do not run appliance over cord. Keep cord away from heated surfaces. » Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 
• Do not handle plug or appliance with wet hands. » Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow. 
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. 
• Turn off all controls before plugging or unplugging appliance. » Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present. 
• Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors. 
• Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.). 
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 
• Use only BISSELL cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formula section of this guide. 
• Do not immerse. Use only on surfaces moistened by the cleaning process. 
• Keep appliance on a level surface. 
• Do not carry the appliance while in use. 
• Always install float before any wet pick-up operation.

NOTE: STORE CLEANER IN A PROTECTED, DRY AREA. SINCE THIS PRODUCT USES WATER, IT MUST NOT BE STORED WHERE THERE IS A DANGER OF FREEZING. FREEZING WILL DAMAGE INTERNAL COMPONENTS AND VOID THE WARRANTY.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance. 
GROUNDING INSTRUCTIONS 
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Grounded Outlet
Grounding Pin

This model is for household use only.

Package Contents deep cleaner PROHEAT 2X REVOLUTION

1. Upper Handle 
2. 1 Screw attached to Upper Handle 
3. Base with Dirty Water Tank 
4. Clean Water Tank 
5. Carry Handle 
6. BISSELL Professional Deep Cleaning formula 
7. BISSELL Deep Clean + Antibacterial Formula 
8. Accessory bag & hose 
9. Attachments/accessories (vary by model) 
10. Nozzle Clean Out Tool

NOTE: Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap

Getting to Know Your Deep Cleaner PROHEAT 2X REVOLUTION

1 Upper Handle 
2 Easy Fill/Formula Cap 
3 Clean Water Tank (1 Gallon Capacity) 
4 Power Button 
5 Float Stack 
6 Dirty Water Tank 
7 Belt Access Door 
8 Foot 
9 Spray Trigger 
10 In-Use Cord Clip 
11 Cleaning Mode Switch 
12 Accessory Hose Door 
13 Belt/Brush Access Plate 
14 EdgeSweep Brushes 
15 Carry Handle 
16 Rubber Tab (on Dirty Water Tank) 
17 Quick Release for Wrapped Cord 
18 Recline Pedal

Assembly

WARNING 
Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures.

Your deep cleaner comes in four easy-to-assemble components and an accessory bag. 
• Base 
• Upper Handle 
• Clean Water Tank 
• Carry Handle 

In Step 3, you will need to assemble your deep cleaner is a Phillips screwdriver.

First, insert the upper handle at the top of the base until you hear a “click”. 

Side View
Next, align the carry handle with the slots on either side of the base (behind the power switch and cleaning mode switch). The carry handle will “click” into place.

Using a Phillips screwdriver, secure the carry handle with the screw that’s taped to the upper handle.

Wrap the cord around the carry handle and quick release hook.

Side View
At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place. 

Cleaning Formulas Deep Cleaner PROHEAT 2X REVOLUTION

WARNING 
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. 

Keep plenty of genuine BISSELL 2X* formula on hand so you can clean and protect whenever it fits your schedule.
Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.

BOOST 
CARPET CLEANING FORMULA ENHANCER

Oxy Boost 
Removes old, set-in stains permanently
Renew Boost
 Revives carpets to look their best
Prevent Boost
Repels stains from soaking into carpet fibers
Pet Oxy Boost
Removes pet stains and odors permanently

PRETREAT 
PRE TREAT SPOTS AND STAINS TO IMPROVE CARPET CLEANING PERFORMANCE

Stain PreTreat
Pretreat to penetrate and loosen tough stains
Pet Stain PreTreat
Pretreat to help remove tough pet stains and odors
Pet PreTreat + Sanitize
Penetrates to sanitize and loosen tough stains 

DeepClean + Antibacterial
2-in-1 formula
Professional Deep Cleaning
Out cleans all other formulas Includes Scotchgard™ Protector

2X* CLEANING FORMULA

Pet Stain & Odor
Removes tough pet stains and contains patented odor removal technology Includes Scotchgar Protector
DeepClean & Protect
Deep cleans carpets and protects from future stains with Scotchgar Protector
Allergen Cleansing
Helps remove pet & pollen allergens
DeepClean + Refresh
Powerful cleaning with a refreshing scent
Deep Clean + Oxy
Removes deep down dirt, pet stains, & pet odor

BARE FLOOR FORMULAS
Hard Floor Solutions
Safe use for linoleum, vinyl, and ceramic tile; removes tough dirt and grime

ONLY BISSELL Protects from future stains with Scotchgar Protector. 
Scotchgard is a trademark of 3M. 
*2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula. 

Tips Before Carpet Cleaning 
• If cleaning an entire room, consider moving your furniture to another area. 
• Use a dry vacuum cleaner over area before using your deep cleaner. 
• Pre-treat stains with BISSELL PreTreat to improve performance on coffee stains and ground-in dirt.

Customize Your Clean & Maximize Your Results Deep Cleaner PROHEAT 2X REVOLUTION

For Antibacterial Clean:
Use BISSELL Deep Clean + Antibacterial formula

Use BISSELL Deep Clean + Antibacterial with the Deep Clean Mode of your machine to achieve antibacterial results.

For Pet Stains & Odors:
Erase pesky stains & remove odors! 

Pretreat pesky pet stains with BISSELL Pretreat spray before using your deep cleaner. Choose a BISSELL pet formula for your deep cleaner and clean as directed.

To Clean Dark Stains:
Remove stains permanently!

Use BISSELL Deep Clean + Oxy formula or add BOOST OXY to any of your favorite BISSELL formulas to maximize the stain removal power.

To Remove Ground-In Dirt:
Renew your carpet!

Pretreat ground-in dirt with a BISSELL Pretreat Spray. Choose BISSELL Professional Deep Cleaning formula and pair with a BISSELL Boost to enhance your cleaning.

To Refresh Your Home:
Choose your favorite scent!

Pair your carpet cleaner with BISSELL Febreze™ formulas to give your home a clean and refreshing scent

To Prevent Future Stains:
Protect your newly cleaned carpets! 

Prevent stains from setting in by deep cleaning with BISSELL Deep Clean + Protect plus Scotchgard Protector. 
Add BISSELL Boost Prevent for enhanced performance.

Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.

Customize Your Clean & Maximize Your Results

Pretreat Pesky Stains

Pretreat stains for improved deep cleaning performance. 
Stains may include but are not limited to: 
• coffee 
• dirt 
• oil 
• cosmetic makeup 
• pet messes

Choose Your Formula

Prepare your deep cleaner using the dosing instructions or fill lines. 
Always use genuine BISSELL deep cleaning formulas. 
Non-BISSELL cleaning solutions may harm the machine and will void the warranty. 
ONLY BISSELL protects from future stains with Scotchgard  Protector. 
Scotchgard is a trademark of 3M 
2.5 fl. oz. is equivalent to 5.0 fl. oz of nonconcentrated formula.

BOOST Your Deep Clean

DESIGNED TO MAXIMIZE THE PERFORMANCE OF DEEP CLEANING MACHINES 
BISSELL Boost OXY 
Life makes messes, especially on carpet. OXY boost removes those stains from your life – permanently. Tough stains are no match for this oxygen formula. 
BISSELL Boost PREVENT 
Add stain-resisting power to your carpet every time you deep clean. PREVENT boost repels future stains from soaking into carpet. 
BISSELL Boost RENEW 
With RENEW boost, you can say goodbye to those heavily-soiled, high-traffic areas. Bring new life to dingy, matted carpet. 
BISSELL Boost PET OXY PET OXY 
boost removes pet stains and odors permanently. Enjoy life with your pet, stain and odor free!

Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.

Filling Your Clean Water Tank:

If you’re not using a formula with a yellow easy fill cap, please refer to filling instructions on page 10.

Clean Water Tank (1 Gallon)
Dirty Water Tank
The clean water tank is at the top of the machine.

Lift the clean water tank straight up to remove from the machine.

Unscrew the cap from the clean water tank. Add hot tap water to the water fill line. Twist cap back into place.

Firmly insert the formula bottle into the color coded cap on the clean water tank. Simply squeeze until formula reaches the EasyFill line.

At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place.

A few notes about filling the clean water tank: 
• Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. 
• When using BISSELL Deep Clean + Antibacterial formula: Only fill your clean water tank with the recommended amount of water and formula to achieve anti-bacterial benefits. 

ATTENTION 
Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Filling Your Clean Water Tank: 
2X Concentrated Formula 

Clean Water Tank (1 Gallon)
Dirty Water Tank
 The clean water tank is at the top of the machine.

Lift the clean water tank straight up to remove from the machine.

Unscrew the cap from the clean water tank. Add hot tap water to the water fill line. Next, reference the chart below for formula amounts to add to the tank. Twist cap back into place.

At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place.

NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR 
TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution with other household cleaning products.

Pour in more power with BISSELL Boosts 
• Fill tank with water and 2X formula (Step 3 above). 
• Add 2 ounces of any BISSELL Boost per 1 gallon of water. 
• The ProHeat 2X Revolution has a 1 gallon clean water tank.

Cleaning Your Carpet Deep Cleaner PROHEAT 2X REVOLUTION

Plug into a properly grounded outlet. 

Select cleaning mode: 
Deep Clean Delivers a deep clean to your carpet. 
Express Clean Provides a lighter clean with about 1 hour of dry time. 
*Choose “Deep Clean” mode and use BISSELL Deep Clean + Antibacterial to deliver antibacterial benefits.

Press the power button to turn the machine on. To recline your machine for use, press the recline pedal with your foot.

Deep Clean Mode: 
1. Press the spray trigger to apply solution while making 2 slow wet passes - 1 forward and 1 back. 
2. Release the trigger. 
3. Make 2 slow dry passes - 1 forward and 1 back, to suck up the dirty solution. (Do not hold down the trigger for this step.) 
NOTE: For best cleaning performance, clean with your machine in Deep Clean Mode. 
Deep Clean Mode: 
When using BISSELL Deep Clean + Antibacterial Formula 
1. Press the spray trigger to apply solution while making 3 slow wet passes - 1 forward, 1 back, and 1 forward again. 
2. Release the trigger. 
3. Make 1 slow dry pass back, to suck up the dirty solution. (Do not hold down the trigger for this step.) 
Express Clean Mode: 
1. Press the spray trigger to apply solution while making 2 wet passes - 1 forward and 1 back. 
2. Release the trigger. 
3. Make 2 dry passes - 1 forward, 1 back to suck up the dirty solution. (Do not hold down the trigger for this step.) 
NOTE: In Express Clean Mode, the dirty tank will not get as full as when cleaning with Deep Clean Mode.

Cleaning Area Rugs Deep Cleaner PROHEAT 2X REVOLUTION

Important! Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. Not for use on silk or delicate area rugs.

Regularly clean your high-traffic area rugs in Express Clean mode to remove the forgotten dirt.

Select Express Clean Mode

Test in a small inconspicuous area first for colorfastness.
Important: Keep the foot of the deep cleaner perpendicular to the rug’s edge with each cleaning pass to prevent damage.

Cleaning with Hose and Tool Deep Cleaner PROHEAT 2X REVOLUTION

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Brushroll continues to rotate when in the upright position. 
• Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use. 
• With brushroll on, do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result. 

Lift the accessory hose door on top of foot on the front of the machine. The door flips toward the machine to open.

Insert the hose and snap into place. Be sure the colored hose release clip is facing out, away from machine.

Attach the tool to the end of the hose. (Tools may vary by model.) Press the power button to turn machine on.

Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area. 
Release the trigger to suck up the dirty solution. Work in small sections until the area is clean. 
When finished cleaning, turn the machine on to suction up warm clean water to rinse the inside of the hose and tool. Detach the hose and tool and close the accessory hose door. Let the hose and tool air dry before storing.

NOTE: If using the Mini Deep Reach Tool, be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers.

Cleaning with the Bare Floor Tool*  Deep Cleaner PROHEAT 2X REVOLUTION

*Bare Floor Tool not included with machine.

NOTE: The bare floor tool that is compatible with the ProHeat 2X Revolution is not included. It is available for purchase by contacting our team by phone or visting us online at.

With the machine unplugged, attach the bare floor tool to the bottom of the machine by lining the tool to the edge of the nozzle. Rotate down until it clicks into place. 
Follow filling instructions on page 10 and switch cleaning mode to Express Clean.

Plug into a properly grounded outlet and press the power button. 
Clean by pressing the trigger for 1 wet pass forward, 1 wet pass back, and then release the trigger and make 1 dry pass forward, 1 dry pass back.

When finished, unplug the machine and remove the bare floor tool by rotating the tool up to unhook from the nozzle. 
Rinse and let dry before storing. Refer to page 14 for emptying the dirty water tank. Refer to page 15 for cleaning your machine before storing.

WARNING 
WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool (1606611) must be used and is only to be used with BISSELL Hard Floor Solutions formula intended for use with this appliance.

Maintenance: Empty Dirty Water Tank Deep Cleaner PROHEAT 2X REVOLUTION

WARNING 
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

To release dirty water tank, press down on the colored tank handle.

Tilt the tank slightly toward you. Grab the handle and tank with both hands.

Pull dirty water tank up and away to remove.

For quick empty: 
Pull the rubber tab and tilt to pour. (Located at the corner of the top of the tank.) 
When closing the rubber tab, make sure all edges are sealed tight.

For final clean and rinse: 
Unscrew the ring at the bottom of tank. 
Gently remove the float stack, rinse, and clean. 
Once clean, return float stack into the tank by lining up the arrows so they point at each other. This is the only way the float stack will fit into the tank. 
With the arrows aligned, the float stack should lock into place. 
Return the ring and twist to lock. Water may leak if the ring is not fully tightened.

Clean the red filter below the dirty tank by wiping off any remaining dirt or debris.

To return the dirty tank: Angle the tank and insert bottom first. Then tilt the tank toward the machine and push the top in until it clicks into place.

Did You Know? 
The Float Stack is what prevents your dirty tank from overflowing. 

Maintenance: Cleaning Machine After Use Deep Cleaner PROHEAT 2X REVOLUTION

WARNING 
To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

First, fill the clean water tank with warm tap water and then empty it all to rinse. Then fill again with warm tap water and return the tank to the machine. 
Twist cap back on tightly. 
To flush and rinse the machine: Turn the machine on and press the trigger for 15 seconds while making back and forth passes on a section of carpet. 
Finally, release the trigger and suck up the water. 
See page 14 to clean the dirty tank from the water that was just sucked up. 
Empty the clean water tank and let dry before storing. 
Wipe your machine’s exterior with a soft cloth.

Maintenance: Cleaning the Nozzle Deep Cleaner PROHEAT 2X REVOLUTION

If pet hair or debris become clogged in the nozzle, it can be cleaned out of the nozzle with the nozzle clean out tool. 
Turn off and unplug the machine from the grounded outlet.

Remove the nozzle from the foot: flip the accessory hose door open and lift up on the nozzle and accessory hose door.

Hold the nozzle and insert the nozzle clean out tool into the thin slot, on the end of the nozzle that touches the floor. Clean until free of pet hair or debris.

Return the nozzle back to the foot of the machine. Line up the three hooks on the nozzle to the bottom of the foot. (see arrows for location) 
Rotate the nozzle up and click into place. Close the accessory hose door.

Maintenance: Cleaning the Brush Rolls Deep Cleaner PROHEAT 2X REVOLUTION

Turn off and unplug the machine from the grounded outlet. 

Lay the machine down on its back or side.

Use the comb to brush out the debris or hair from the brush rolls.

Maintenance: Replacing Small Belt, Large Belt, or Brush Rolls Deep Cleaner PROHEAT 2X REVOLUTION

What you will need: 1 Phillips screwdriver & 1 flathead screwdriver

Now, if the Flat Pump Belt was broken, place a new Flat Pump Belt around the red area of the large pulley. Then use your thumb to stretch it toward the back of the machine and transfer it onto the metal axle.

Here you should see one (1) belt. This is the Flat Pump Belt. If the Flat Pump Belt is broken, gently remove it from the machine. We will replace this belt in Step 5.

Turn the machine on its side. The Power Button should be facing up. Remove the 3 screws on the Belt/Brush Access Plate using a Philips screwdriver. Remove the Access Plate to expose the Brush Cover and Cogged Large Pump Belt.

Remove the Brush Cover by lifting straight up. Remove the Cogged Large Pump Belt. The brush rolls can be replaced or cleaned at this time, if needed.

Maintenance: Replacing Small Belt, Large Belt, or Brush Rolls (continued) Deep Cleaner PROHEAT 2X REVOLUTION

Now, if the Flat Pump Belt was broken, place a new Flat Pump Belt around the red area of the large pulley. Then use your thumb to stretch it toward the back of the machine and transfer it onto the metal axle.

Spin either brush. If they both spin, continue to Step 7.
If only one spins, the opposite belt is broken and you must remove both brushes and replace the Small Cogged Brush Belt. 
Place the new belt around both brush gears and slide them onto the thin metal axles.

To replace the Cogged Large Pump Belt, make sure your Revolution is completely reclined. Begin by wrapping the Cogged Large Pump Belt around the small metal-toothed pulley. While wrapped around the pulley, stretch and wrap around the nearest brush gear.

Return the Brush Cover. Make sure that the brushes are aligned and the cover is secure.

Return the Belt/Brush Access Plate to the end of the brush rolls by securing with the 3 screws. 

Turn the machine to lay on its back.
Lastly, slide the Belt Access Door back into place. You should hear it “click” into place. 

Troubleshooting Deep Cleaner PROHEAT 2X REVOLUTION

WARNING 
To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.